[ Chinese wardrobe net ] Winter weather is getting cold, heating measures are generally used in the home, but the custom wardrobe is particularly "fragile", too high temperature is a kind of damage to the custom closet, then. How to solve the winter wardrobe becomes "fragile"? Then please see: maintenance of the magic five steps Winter wardrobe maintenance first step 1: The slab type wardrobe should not be dry, so the slab type wardrobe should not be exposed to the sun. Do not place the wardrobe directly in the heating furnace, fireplace, etc.; the position placed indoors should be away from the strong air flow parts such as the doorway, window and tuyere. The air conditioner is blowing against the closet. The slab type wardrobe must be stored in a moderate amount, and the objects stored in the cabinet should not exceed the door frame. If the hard squeezing is often carried out, the door of the cabinet will be deformed, and the doors and drawers of the wardrobe should be protected from deformation caused by the pressing of clothes. Plate-type wardrobes are generally used for a long time, so it is usually necessary to protect the surface coating of the wardrobe. It is best to wipe it once with a little wax every three months, which not only increases the appearance of the wardrobe, but also protects the wood. Winter wardrobe maintenance second step: Keep the wardrobe tidy and clean the dust with a clean gauze every day. It is not advisable to use a chemical brightener to avoid damage to the paint film. In order to maintain the brightness of the wardrobe paint film, the walnut can be crushed, peeled, and then polished with three layers of gauze. The placement must be square, the force direction of the legs and legs should be consistent with the gravity, do not tilt, you can use the foot pad to adjust. The third step of winter wardrobe maintenance: Handle or move the wardrobe should be handled gently, can not pull hard, so as not to damage the structure, resulting in loose overall structure of the wardrobe. Prevent solvents such as alcohol and banana water from coming into contact with the wardrobe. Otherwise, the surface of the wardrobe will be "scarred". When the surface of the wardrobe is stained with dirt, wash it with mild soapy water, dry it, and then wax it once to restore the original appearance, but avoid rubbing with solvent liquid such as gasoline, kerosene or turpentine, otherwise the surface will be wiped off. The gloss of the paint and lacquer. Winter wardrobe maintenance fourth step: The walnut oil used to maintain the wardrobe is only suitable for unpainted, waxed wardrobes. The frequency of use should not be too high. Generally, it can be used once every 2~3 months. In a relatively dry environment, the maintenance interval can be shortened appropriately, and it can be maintained once a month. It should be specially reminded that although the walnut oil can be "dried", it must be paid attention to when using it normally. The oil has the characteristics of vacuuming. If the dosage is too large, the dust will adhere and the greasy feeling will be generated. You can simply wipe the wax (solve the beeswax with a solvent, or moderately heat it) to maintain the wardrobe, especially the back of the panel wardrobe. Note that the amount is small, the number of times is small, only the back and bottom of the closet are rubbed, and the front side is not rubbed, and the moisture of the closet is appropriately closed. The fifth step of winter wardrobe maintenance: Dust is actually a kind of abrasive particles. When wiping dust, use soft cotton cloth to wipe back and forth along the wood grain. If you use a hard dry cloth to rub the paint surface, it will cause the paint surface to be worn and tarnished. Finally, it is to maintain indoor humidity, do not let the wardrobe get wet. In the spring and autumn, the humidifier should be used to limit the time to prevent damage to the wardrobe due to excessive humidity, such as wood decay, rusting of metal parts, and easy opening of adhesive parts. Usually wash the wardrobe as little as possible, and avoid using alkaline water. It should only be wiped with a damp cloth with water and then wiped clean with a dry cloth. The built-in camera of the 5 inch Attendance Face Recognition can take photos and archives of the card readers while swiping the card, so that the card readers have nowhere to hide. The speed of 5 inch temperature measurement Face Recognition is fast can detect the body temperature soon, and the card + photo is completed within 1 second. Adopt super large capacity memory in 5 inch facial identification device. Instant save. No personal privacy is involved. 5 Inch Attendance Face Recognition,5 Inch Face Recognition Attendance Machine,5 Inch Facial Identification Device,5 Inch Face Recognition Guangdong Zecheng Intelligent Technology Co., Ltd , https://www.zecheng-security.com