[ Chinese wardrobe net ] How to identify the hardware of the whole wardrobe 1. Board material: The surface of the whole wardrobe board is made of melamine finish. It does not need paint, the surface is fine, the structure is flat, the texture is hard, and the anti-mite flame retardant is called “no defect sheet†in foreign countries. The middle part of the substrate is medium density board, the density can not be lower than 0.80g/cm3, otherwise the bearing capacity and flatness will be affected; the water content can not be lower than 6.5%, but it should not be too high, otherwise it cannot adjust itself according to the change of climate; Surface technology, by hand touch to distinguish whether it is embossed surface or flat, the relief surface is the best; formaldehyde emission 1.1mg / L, to achieve European E1 standard, and test reports, alert to particle board, dyed moisture-proof board. In addition, good plates have anti-ant, anti-mildew and other functions. 2. Anti-counterfeiting of the board: The whole wardrobe has brand logo on both sides of the embossed board and the edge sealing position. 3. Smell the smell, soak the water test (too fast and not to be lifted). 4. Edge sealing: Whether the overall wardrobe is smooth, delicate, and strong in adhesion (pseudo-deterioration process carefully cracked). 5. The table should be like one: look at the material in the hole in the side panel of the whole wardrobe. Of course, be careful of the material inside the cabinet side panel and the solid board and the laminate (four sides) without punching. 6. Standard specification plate: There are standards, processes and precision to ensure. 7. Aluminum alloy sliding door frame material: look at the overall wardrobe cross section bright and smooth without burrs, the minimum wall thickness requirements of 1.1mm; 8. Whether the key hardware accessories are branded with their own brand anti-counterfeiting labels, and the weight (such as drawer guides). 9. The overall wardrobe pushes and listens to the sound to judge the quality of the pulley, but it does not mean that the sound is as small as possible (may be engineering plastic or nylon); whether the upper rail guide wheel has an adjustment function. Office Partition Stand,Office Divider Round Base,Office Partition Base,Office Screen Mobile Feet,Office Divider Support Stand,Office Divider Mobile Feet MGX Metalworks Co., Ltd. , https://www.metal-mgx.com