[ Chinese wardrobe network ] In recent years, custom wardrobes have been widely acclaimed, and there is a great trend. The reason why the whole wardrobe is favored by consumers is that it can be tailor-made, rational use of space, design more humane, and environmentally friendly, fashionable and professional. However, the core material used as a custom closet is the most important part of the custom wardrobe and the most used part. The quality and workmanship of the panel used by the wardrobe company has become the direct decision on the quality of the overall wardrobe. 1, the plate veneer focuses on quality For some wardrobes, the surface looks good, and with a finger stroke, you can draw obvious scratches. These custom-made wardrobes are made of surface-coated vellum paper or ornate paper sheets that are often used in low-cost wardrobes on the market, and have poor wear resistance. Professional custom closet enterprises generally use environmentally friendly melamine veneer with thicker immersion paint and high temperature and high pressure treatment, which has high surface strength, abrasion resistance and scratch resistance. 2, sheet sealing, pay attention to work The professional custom closet enterprise adopts the precision panel saw cutting board, and there is no chipping around the board. After the edges are sealed, the water in the air is effectively prevented from intruding into the interior of the board. Some companies have no professional equipment at all, rough cutting, and obvious edge collapse around them. Some even cut corners and only cut one side of the front side of the board. If the edgeless surface is easy to absorb the moisture in the air, the plate will expand, causing the wardrobe to deform and affect the service life. 3, focus on environmentally friendly plates Professional custom-made wardrobe companies use environmentally-friendly panels that meet national testing standards, while some companies use inferior panels that have no test reports and pose a potential threat to human health. Therefore, to buy a custom closet should first look at whether the business has a plate inspection report and related test certificate from the national authority inspection department. 4, pay attention to different grades, the plates are also different How to judge the panel of the custom closet, generally look at the cut surface of the sample. From the cut surface, the blockboard is two or four layers of veneers (also thickened using four or more veneers) close to the solid wood core. The quality of the blockboard has a flat cut surface with no gaps. The MDF is pressed by fine fibers, and the combination is relatively tight and the weight is relatively large. The particleboard is a wood-grained structure, but the combination is not tight enough, the weight is light, and the poor quality can even see small pores. The multi-layer board is made of a plurality of veneers, generally three or five layers. Lock Cylinder,Door Lock Cylinder,Key Cylinder,Mortise Lock Cylinder JESSO HARDWARE , https://www.china-jesso.com